Exchange units, shipped from France
enfrde
autoKUR — remanufactured turbochargers, injectors and high-pressure pumps

Fuel injector IVECO Daily 4 29L10 95 hp

29L10 95 hp

The IVECO Daily 4 29L10 95 hp (70 kW diesel) is covered by 2 exchange-standard reference(s). Check output before displacement: it determines the part.

Engine specification: 2287 cm³, diesel, built from 05/2006 to 08/2011. 2 matching part numbers: 0445110435 (Bosch), 0445110273 (Bosch). Compare with the code stamped on your part.

Other engines of the IVECO Daily 4: 35C18 176 hp, 35S18 176 hp, 40C18 176 hp. If the code stamped on your part is legible, search by reference remains the safest route. 24-month warranty.

29L10 V 95 hp 29L12 116 hp 29L12 V 116 hp 29L12 V/P 116 hp 29L14 136 hp 29L14 C 136 hp 35C10 95 hp 35C10 K 95 hp 35C11 106 hp 35C11 K 106 hp 35C11 V 106 hp 35C12 116 hp 35C12 V 116 hp 35C13 126 hp 35C13 K 126 hp 35C13 V 126 hp 35C14 V/P 140 hp 35C15 146 hp 35C17 170 hp 35C17 K 170 hp 35C17 V 170 hp 35C18 176 hp 35S14 136 hp 35S14 140 hp 35S14 C 136 hp 35S14 K 136 hp 35S14 K 140 hp 35S14 V 140 hp 35S17 W 170 hp 35S18 176 hp 40C10 95 hp 40C10 V 95 hp 40C11 106 hp 40C11 V 106 hp 40C12 116 hp 40C12 V 116 hp 40C13 126 hp 40C13 V 126 hp 40C14 140 hp 40C14 K 140 hp 40C14 V 140 hp 40C14 V/P 140 hp 40C15 146 hp 40C17 170 hp 40C17 K 170 hp 40C17 V 170 hp 40C18 176 hp 45C14 140 hp 45C15 146 hp 45C18 176 hp 50C14 140 hp 50C14 K 140 hp 50C14 V 140 hp 50C15 146 hp 50C17 170 hp 50C17 K 170 hp 50C17 V 170 hp 50C18 176 hp 55S17 170 hp 60C14 140 hp 60C14 K 140 hp 60C15 146 hp 60C18 176 hp 65C14 140 hp 65C14 K 140 hp 65C14 V 140 hp 65C15 146 hp 65C17 170 hp 65C17 K 170 hp 65C17 V 170 hp 65C18 176 hp 70C14 140 hp 70C14 K 140 hp 70C14 V 140 hp 70C15 146 hp 70C17 170 hp 70C17 K 170 hp 70C17 V 170 hp

Frequently asked questions

About this category

The Renault Scenic 3 1.5 dCi 95 hp injector category addresses a common failure point in the common rail diesel system, where injectors deliver high-pressure fuel to each cylinder with extreme precision. This range serves independent garages, DIY enthusiasts, and stranded motorists who need a reliable replacement to restore engine efficiency, fuel economy, and emissions compliance without the delays of dealership channels.

Our injector range is built around Bosch OE-equivalent units, selected for their durability and compatibility with the Scenic 3’s 1.5 dCi engine family. The wholesaler-grade packaging ensures cost-effective bulk handling while maintaining the integrity of each injector’s internal components, calibrated to the original specifications for seamless fitment and performance.

Professional uses by trade

Different users approach injector replacement with distinct priorities: garages prioritize bulk availability and fast turnaround, stranded drivers seek immediate solutions, DIYers value clear compatibility data, and German buyers expect precise technical documentation and efficient logistics.

  • Le garagiste independant : Replaces worn injectors in bulk to minimize vehicle downtime during scheduled maintenance or diagnostic sessions.
  • L'automobiliste depanne : Orders a single exchange standard injector when the engine warning light flashes or power loss becomes noticeable on the highway.
  • Le passionne qui fait lui-meme : Verifies injector compatibility using OEM codes before purchasing to ensure a direct bolt-on replacement without modifications.
  • Der deutsche Kaeufer (DACH) : Requests technical datasheets and packaging in German to align with local workshop standards and regulatory expectations.
  • Le garagiste independant : Uses exchange standard units to avoid the administrative burden of core returns when customers decline part consignment.
  • L'automobiliste depanne : Prefers injectors with visible wear indicators or calibration stamps to confirm remanufacturing quality before installation.
  • Der deutsche Kaeufer (DACH) : Selects injectors labeled for the Scenic 3 1.5 dCi 95 hp to ensure compliance with German TÜV or AU inspection requirements.

Range comparison

The following table compares the two Bosch injectors available for the Renault Scenic 3 1.5 dCi 95 hp, highlighting their compatibility, packaging, and intended use cases for different buyer profiles.

RangeUseFormat
Injector Bosch 0445110273High-mileage Scenic 3 replacements
Injector Bosch 0445110435Early-model Scenic 3 injectors

How to choose

Selecting the right injector involves more than matching the OEM code; buyers must consider packaging suitability, storage conditions, and the injector’s internal state to ensure long-term reliability in the common rail system.

  1. Verify the injector’s OEM code against the vehicle’s engine management system to confirm exact fitment for the 1.5 dCi 95 hp engine variant.
  2. Check the packaging for tamper-evident seals and calibration stamps to ensure the injector has undergone professional remanufacturing processes.
  3. Assess the storage conditions of bulk-purchased injectors, ensuring they are kept in a climate-controlled environment to prevent moisture damage.
  4. Prioritize injectors with visible wear indicators or service history documentation to gauge their remaining operational lifespan.
  5. For garages, select cartons with clear batch numbers and expiry dates to maintain traceability and stock rotation efficiency.
  6. DIY buyers should opt for single-unit blisters with detailed technical datasheets to simplify installation and troubleshooting.
  7. German workshops should confirm the injector’s compliance with local emissions standards and workshop documentation requirements.

Storage & logistics

Bulk-purchased injectors must be stored in a dry, temperature-stable environment away from direct sunlight to prevent seal degradation and internal corrosion. Garages should implement a first-in-first-out rotation system to ensure injectors are used before their recommended shelf life expires, while single-unit buyers can store replacements in original packaging until installation. Avoid stacking cartons too high to prevent crushing damage to the injectors’ delicate internal components, and always handle with electrostatic discharge protection to maintain calibration integrity.

Since 2026, we’ve supplied thousands of exchange standard injectors for the Scenic 3 1.5 dCi, building a reputation for precision calibration and consistent quality that garages and DIYers trust when restoring engine performance.— autoKUR team

Related categories

Browse our other ranges:

Useful references

For regulatory and sector references, see Reglement (UE) 461/2010 — pieces de rechange et garantie constructeur.