Exchange units, shipped from France
autoKUR — remanufactured turbochargers, injectors and high-pressure pumps

High-pressure pump RENAULT Kangoo 2 1.5 DCi 75 hp

1.5 DCi 75 hp

2 exchange-standard reference(s) match the RENAULT Kangoo 2 1.5 DCi 75 hp (55 kW diesel). Output is the deciding criterion: a part meant for another output of the same displacement will not fit.

Engine specification: 1461 cm³, diesel, built since 09/2010. 2 matching part numbers: 0445010530 (Bosch), 0445010763 (Bosch). Compare with the code stamped on your part.

Other engines of the RENAULT Kangoo 2: 1.5 DCi 115 hp, 1.5 DCi 110 hp, 1.5 DCi 109 hp. If the code stamped on your part is legible, search by reference remains the safest route. 24-month warranty.

Frequently asked questions

About this category

The 1.5 dCi 75 hp high-pressure pump category addresses a common failure point in Renault’s diesel engines, where wear on the pump’s internal components leads to reduced fuel pressure, erratic idling, or complete engine shutdown. This range targets independent garages, DIY enthusiasts, and stranded motorists seeking a reliable exchange-standard solution that restores original performance without the cost of a new OEM unit.

Curated from wholesale suppliers specializing in remanufactured diesel injection systems, this range prioritizes OE-equivalent Bosch components, ensuring mechanical integrity and longevity. The selection process excludes untested aftermarket alternatives, focusing instead on pumps that meet the dimensional and functional tolerances of the 1.5 dCi 75 hp engine’s fuel delivery system.

Professional uses by trade

Whether replacing a failing pump in a workshop setting or sourcing a backup for a roadside repair, this category serves professionals and motorists alike by providing pre-verified, exchange-standard units ready for immediate installation.

  • Le garagiste independant : Replace a worn 1.5 dCi 75 hp high-pressure pump during a routine service to restore fuel delivery precision and avoid costly engine damage.
  • Le garagiste independant : Stock exchange-standard pumps to minimize vehicle downtime for customers reporting intermittent power loss or hard starting.
  • L'automobiliste depanne : Order a high-pressure pump for a 1.5 dCi 75 hp engine when the vehicle enters limp mode due to fuel pressure irregularities.
  • L'automobiliste depanne : Purchase a pump as a precautionary measure if the dashboard displays a glow plug or fuel system warning light.
  • Le passionne qui fait lui-meme : Swap out a faulty pump in a driveway repair, using the vehicle’s OEM reference to confirm compatibility.
  • Le passionne qui fait lui-meme : Source a pump with a core deposit option to reduce upfront costs while ensuring responsible recycling of the old unit.
  • Der deutsche Kaeufer (DACH) : Bestellen Sie eine Austauschpumpe für den 1.5 dCi 75 hp Motor, wenn die Werkstatt einen Defekt an der Hochdruckpumpe diagnostiziert hat.

Range comparison

Below, compare the two Bosch high-pressure pump references available for the 1.5 dCi 75 hp engine, including their technical specifications and practical applications.

RangeUseFormat
High-pressure pump Bosch 0445010763Direct replacement for 1.5 dCi 75 hp engines
High-pressure pump Bosch 0445010530Alternative for specific 1.5 dCi 75 hp variants

How to choose

Selecting the correct high-pressure pump for a 1.5 dCi 75 hp engine requires verifying the vehicle’s OEM reference, engine code, and model year to ensure seamless integration.

  1. Confirm the pump’s compatibility by cross-referencing the vehicle’s engine code, typically found on the engine block or vehicle registration documents.
  2. Prioritize pumps labeled as exchange-standard to ensure they meet remanufactured quality standards, including pressure calibration and leak testing.
  3. Opt for units with a core deposit option to reduce initial costs while promoting the return of the old pump for responsible recycling.
  4. Check the packaging for tamper-evident seals and storage instructions to prevent contamination or damage before installation.
  5. Verify the pump’s rotational direction and connector orientation to match the engine’s fuel system layout, avoiding installation errors.
  6. For bulk orders, request a batch with uniform serial numbers to streamline inventory management and traceability in a workshop setting.

Storage & logistics

Store exchange-standard high-pressure pumps in a climate-controlled environment, away from direct sunlight and moisture, to preserve their mechanical integrity. Ensure the packaging remains intact until installation to prevent contamination of the pump’s internal components. For workshops, organize pumps by vehicle model and engine code to expedite retrieval during repairs, reducing search time and improving operational efficiency.

With over a decade of experience in diesel injection systems, our team ensures every 1.5 dCi 75 hp pump meets the same rigorous standards as OEM units, delivering reliability without the premium price.— autoKUR team

Related categories

Browse our other ranges:

Useful references

For regulatory and sector references, see Reglement (UE) 461/2010 — pieces de rechange et garantie constructeur.