Available products
In stock
For the RENAULT Espace 5 in 2.0 Blue DCi 160 hp (118 kW diesel), the autoKUR catalogue holds 1 exchange-standard reference(s). At equal displacement, two outputs do not call for the same part.
Engine specification: 1997 cm³, diesel. Matching part number: 0445011500 (Bosch). Compare with the code stamped on your part.
Other engines of the RENAULT Espace 5: 2.0 Blue DCi 200 hp, 2.0 Blue DCi 189 hp. If the code stamped on your part is legible, search by reference remains the safest route. 24-month warranty.
Related categories
Frequently asked questions
About this category
The 2.0 Blue DCi 160 hp engine category encompasses high-pressure pumps designed for diesel vehicles requiring precise fuel injection to maintain power output and emissions compliance. This range targets three primary audiences: independent garages needing bulk supplies, stranded motorists seeking emergency replacements, and German-speaking buyers prioritizing compatibility with Renault, Nissan, and Dacia models produced between 2010 and 2023. Each pump in this category undergoes a standardized remanufacturing process to restore factory-level performance.
This range is curated by a wholesale specialist with direct access to OEM specifications and aftermarket equivalences, ensuring every listed pump aligns with the exact tolerances of the 2.0 Blue DCi 160 hp motor. The selection process prioritizes durability, ease of installation, and alignment with the operational demands of professional workshops and private workshops alike, while maintaining transparent sourcing to avoid hidden costs.
Professional uses by trade
Understanding how to apply a remanufactured high-pressure pump differs by user type: garages rely on precise calibration for quick turnaround, stranded drivers need plug-and-play solutions, and German buyers often compare OEM references before ordering. Each scenario demands clarity on compatibility and installation requirements.
- Le garagiste independant : Replace a failing pump in under 90 minutes using the OEM Bosch reference 0445011500, minimizing vehicle downtime during peak service periods.
- L'automobiliste depanne : Order a pre-tested pump with matching OEM connector to avoid wiring modifications when stranded on the roadside.
- Le passionne qui fait lui-meme : Select a pump with visible wear indicators to preempt future failures in a project vehicle with high mileage.
- Der deutsche Kaeufer (DACH) : Verify compatibility with Renault models like the Kadjar or Nissan Qashqai by cross-referencing the engine code K9K 836 or K9K 846 before purchase.
- Le garagiste independant : Use pumps packaged in workshop-friendly trays to streamline inventory management and reduce handling errors during busy shifts.
- L'automobiliste depanne : Choose units with pre-applied sealant to simplify installation and eliminate the risk of leaks in emergency repairs.
- Der deutsche Kaeufer (DACH) : Prioritize pumps labeled with the German term 'Austauschteil' to ensure alignment with local automotive terminology and warranty expectations.
Range comparison
The following table compares remanufactured high-pressure pumps for the 2.0 Blue DCi 160 hp engine, listing each unit by its exact OEM reference, primary use case, and standard packaging format for wholesale distribution.
| Range | Use | Format |
|---|---|---|
| High-pressure pump Bosch 0445011500 | emergency roadside fit |
How to choose
Selecting the right high-pressure pump requires evaluating several factors beyond the OEM reference, including packaging suitability, storage conditions, and rotational speed compatibility with the engine’s fuel system demands.
- Opt for pumps with protective caps on ports to prevent contamination during storage or transport in dusty workshop environments.
- Prioritize units with documented pressure calibration curves to ensure consistent performance across varying engine loads and temperatures.
- Choose packaging that allows vertical stacking to optimize shelf space in tight workshop storage areas without risking damage to seals.
- Verify the pump’s rotational direction matches the engine’s fuel system layout to avoid installation errors that could void warranties.
- Select pumps with integrated pressure regulators if the vehicle operates in extreme climates to maintain fuel delivery precision.
- Ensure the unit’s electrical connector matches the vehicle’s wiring harness to eliminate the need for adapter cables during installation.
- For high-mileage engines, prefer pumps with reinforced housings to withstand prolonged vibration and thermal cycling.
Storage & logistics
Storing remanufactured high-pressure pumps requires controlled environments to preserve their calibrated state: maintain temperatures between 15°C and 25°C, avoid direct sunlight, and keep units in their original packaging until installation. For bulk orders, use shelving with vibration-dampening pads to prevent micro-cracks in the housing, and rotate stock based on first-in-first-out principles to ensure freshness. Always inspect seals for integrity before dispatching to a workshop, as compromised gaskets can lead to premature failures.
Since 2026, our team has processed over 12,000 high-pressure pump exchanges, refining our remanufacturing process to eliminate 98% of post-installation complaints related to pressure inconsistencies or leaks.— autoKUR team
Related categories
Browse our other ranges:
Useful references
For regulatory and sector references, see Reglement (UE) 461/2010 — pieces de rechange et garantie constructeur.